01/02/2012 to 01/08/2012

Job position offer- LENR pathological sceptics only

Even though radioactivity emissions from Hyperions is far below WHO limits, someone from our R&D team brought into our attention an idea “threw” in other Internet forums: use of canaries birds as a biological detector to study any biological effects on these tinny creatures. In order to run this “project” a special job position, to take care of our canaries, is offered .

The perfect candidate for our canaries care position should have the following minimum characteristics:

1. Been a proved sceptic in LENR (with no doubt). The maximum posts/day/site against LENR is required in applications in order to validate such characteristic of the candidate.(Criteria code SC). This is mandatory requirement as far as we do not offer any special insurance coverage for radioactivity hazardous in our job positions due to an emergency cost cut-off program (we have to phase “killing competition”!)
2. Have a lot of free time to spare (number of general posting/day in the Internet is also required in application). (Criteria code: FT)
3. Been anonymous (please refer to http://www.youtube.com/watch?v=xoDPV5O7Dds to see why) -Caution:Our birds can leed to self destruction! Criteria code: a-cat

4. Basic knowledge in nuclear physics, chemistry and bird avionics (high school level). Please refer to http://www.youtube.com/watch?v=mFa5JA9Fau8 to see why. Criteria code: PH

We offer:

1. Basic Greek salary hair cut as per recent IMF instructions,full medical coverage, 4 meals/day and a bed/bath within one of our labs.
2. Free unlimited access to the Internet.
3. Nice view of the Hyperion’s experiments in our test-labs. No NDA is required as far as we and our products do not exist for a real sceptic candidate.

Please send your application in this topic (job-position link in our site is sometimes out of order)
DGT

Congratulations maryyugo!
You got the job…

Fortunately for you, the position does not require any sense of humor. Welcome to feed the birdies.

Defkalion Forum

01/08/2011

********************************************************

E-Cat Heater and Cooling System is a Steam Powered Heat Pump

Energy Catalyzer 3

01/07/2011

********************************************************

Fyodor
January 7th, 2012 at 10:38 AM

I apologize if you have gotten this post multiple times-I am having trouble with the spam filter.

Mr. Rossi

I hope all is well with you and that you had a good new year.

1. Can you tell us anything new about the nature of your recent breakthrough that will let you build the Ecat more cheaply? What part of the Ecat does it relate to? What was the previous cost issue that you can now avoid?

2. I understand that you have been negotiating with Home Depot? Have they seen the Ecat yet? Has it been tested for them?

Thank you for taking the time from your busy schedule to answer my questions.

Fyodor

Andrea Rossi
January 7th, 2012 at 10:49 AM

Dear Fyodor:
1- A new design and technology, which is confidential, allows easy big scale production and very cheap price. No more information is necessary to our Customers, who are interested to efficiency and price, not to the confidential part of the technology. Why are you interested to it? Are you a competitor? ( Your address relates to a fake name, by the way)
2- We are in discussion with many possible distributors. We will give precise information when any deal will have been made.
Warm Regards,
A.R.

********************************************************

Lu
January 6th, 2012 at 1:49 PM

Dear Andrea,

While the recent news about domestic E-cats has certainly been exciting, I’m curious, has there been any additional sales in your 1MW E-cats beyond the previous 13 sales you have announced?

Thanks,
L.F.

Andrea Rossi
January 6th, 2012 at 3:11 PM

Dear Lu:
No.
Warm Regards,
A.R.

********************************************************

Tom Jones
January 6th, 2012 at 11:49 AM

Dear Andrea Rossi,

Have you figured out where to hide when your customers realize that the E-Cat is nothing more than an electric water heater?

Warm regards, Tom

Andrea Rossi
January 6th, 2012 at 12:10 PM

Mr ” Tom Jones”:
Since you used (a little bit cowardly) a fake name to make your comment, I can say without fear to damage you: what a stupid comment! Of course the E-Cat is a water heater, all the persons who have pre-ordered it and who will buy it know perfectly that it is what we always said it is: a water heater. With a difference between a normal water heater and the E-Cat: the normal water heaters use gas or oil or electricity in a measure bigger than the thermal energy produced heating the water, while the E-Cat makes 6 kWh consuming 1 kWh.
Good Bye, “Tom Jones”.
A.R.

********************************************************

Like Wright Brothers, Rossi Ahead of His Time

Delaware County Daily Times

01/06/2012

********************************************************

Why Rossi’s Fast Track Path to Commercialization May Not be Impossible

E-Cat World

01/06/2011

********************************************************

Why the Andrea Rossi E-Cat will Rock 2012

Andrea Rossi E-Cat

12/05/2011

********************************************************

E-Cat household fusion still sketch, may be in Home Depot in 2012

Dvice.com

12/05/2011

********************************************************

Italo R.
January 4th, 2012 at 3:12 PM

Dear Ing. Rossi, you have written:
“…probably we will produce the E-Cats for Sweden directly in Sweden…”

What about producing E-Cats for Italy directly in Italy?
As you know, things are going very bad in Italy…
And one or more factories here could really help a lot, giving people hope in a better future for them and their children.

Andrea Rossi
January 4th, 2012 at 4:27 PM

Dear Italo R.:
In Italy we surely will develope a R&D center; further developments will depend on how the market will go. We will be extremely dynamic and will move rapidly where it will be opportune.
Warm Regards,
A.R.

********************************************************

Kim Patterson
January 3rd, 2012 at 6:45 PM

Thanks Andrea for your Radio Show
Interview with James Martinez.

Your really are pouring on the
fertilizer for your growing
E-cats!

Respect
Kim

Andrea Rossi
January 4th, 2012 at 3:01 AM

Dear Kim Patterson:
Thank you. James Martinez has made a very good interview: it is still unknown to the People of the USA that Leonardo Corporation, a US industry, is making and growing up (fertilizing also, as you say) tremendous job there, and such interviews are useful to make this well known
Warm Regards,
A.R.

********************************************************

Wolf
January 3rd, 2012 at 8:12 PM

Dear Mr. Rossi,

as we have heard recently, you plan on distributing the Ecats with the help of Home Depot. The service man which installs the Ecat in the home of the buyer, must then contact you before in order to receive instructions on how to install the Ecat. However: How do you plan on creating a service network for refueling the Ecats every 6 month? Is this so simple that anyone can do it?

Thanks for your time and all the best!

Wolf

Andrea Rossi
January 4th, 2012 at 2:53 AM

Dear Wolf:
We are in contact with Home Depot for the distribution of the E-Cat, but until the certification procedures are not completed the deal can’t be struck. This is a work in progress, not a work done.
Yes, the refill will be very, very simple and we will give preference to the assistance made directly by the already trusted installer or contractor of the Customer, so that he also will become a point of force for us.
Warm Regards,
A.R.

********************************************************

What if Low Energy Nuclear Reaction (LENR) really works?

OpEdNews

01/04/2011

********************************************************

Bernie Koppenhofer
January 2nd, 2012 at 9:27 PM

Mr. Rossi: Can you provide us any more information on the E-Cat that was sold as a result of the November 28th demonstration. Is it operating? How is it being used? Thanks

Andrea Rossi
January 3rd, 2012 at 12:20 PM

Dear Bernie Koppenhofer:
No, we are still working on it with the Customer and with National Instruments to upgrade the control systems and to make it fit for the specific task it has to go to do. As I said, a magnificence is growing up, while we are making stronger the E-Cat technology and engineering.
Warm Regards,
A.R.

********************************************************

Iggy Dalrymple
January 3rd, 2012 at 4:39 PM

Dear Dr Rossi,

You speak of your 1st generation home E-Cat providing both heat and cooling. Through what mechanism can your machine provide cooling?

Sincerely,

Iggy Dalrymple

Andrea Rossi
January 3rd, 2012 at 5:22 PM

Dear Iggy Dalrymple:
We will use a heat pump.
Warm regards,
A.R.

********************************************************

Cold is back as hot topic on the non-conventional energy front

The Hindu Business Line

12/03/2011

********************************************************

Gherardo
January 3rd, 2012 at 3:40 AM

Dott.Rossi,
I was thinking about the perfect e-cat for a home/house.
It has to provide:
1) hot water
2) home heating in winter
3) electricity production
4) air conditioning directly from heat in the summer

In addition since the unit works continuosly it would be appropriate to add a control unit to deliver excess capacity to the public electric grid.
Last, an extended refueling time like 12 or 24 months.
Regards, Gherardo

Andrea Rossi
January 3rd, 2012 at 4:44 AM

Dear Gherardo, that will be the further generation. The first generation will produce heat and air conditioning.
Warm Regards,
A.R.

********************************************************

Dag Gullberg
January 2nd, 2012 at 5:22 AM

Andrea Rossi,

Best wishes for 2012.

I have a question about an alleged statement of yours (in July 2011 according to freeenergytruth.blogspot.com):
“97 E-Cats In Operation Right Now Accross 4 Countries”

Is this a statement you recognize and can confirm as yours?

If this is correct, what energy output range are we talking about on those devices?

br
/Dag Gullberg

Andrea Rossi
January 2nd, 2012 at 3:42 PM

Dear Dag Gullberg:
Those were the E-Cats which have been assembled to make the 1 MW plant tested on oct. 28th: all of them have been put in operation to test them in the factories where we made them.
Warm Regards,
A.R.

********************************************************

Fyodor
January 1st, 2012 at 10:25 PM

Dear Mr. Rossi

I am very intrigued by your plans to mass produce the 10KW units. It seems that even beyond the difficulties of manufacturing, the mass production of many units will require advanced processes for quality control, testing, etc, to make sure that all of the very large number of products are working correctly and safely.

For example, it seems that it will not be practical for you to personally test each device and you will need trained engineers and technicians, etc.

Can you tell us more about how you are planning to develop these capacities? Will this be done by your partners and their employees or your own employees. How much know-how will you be giving to the technicians and other employees involved in the process.

It seems that for good reason you have been very careful to keep all important information secret but building at this scale will require more openness.

Thank you for taking time from your busy schedule to answer my questions and happy new year

Fyodor

Andrea Rossi
January 2nd, 2012 at 3:46 PM

Dear Fyodor,
We are working on all the issues you correctly put in evidence.
Warm Regards,
A.R.

********************************************************

Defkalion States Market Entry In 2012 With Scalable Hyperions Up to 5 MW

E-Cat World

01/02/2012

********************************************************

E-cat apparently Ready for Heating but not Electric Production

Energy Catalyzer 3

01/02/2012

********************************************************

2012 – The Year of LENR or Bust

Tony’s Blog

12/02/2011

********************************************************

LENR Promoted as Energy Solution in Michigan Senate Race

Conservativebyte.com

12/02/2011

********************************************************

The Nuclear Active Environment and Metals That Work

Video – Courtesy of Edmund Storms and Cold Fusion Now

01/02/2012

_____________________________________________

Short URL for this page:  http://wp.me/P1SDhJ-P1
Advertisements

Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s