01/16/2012 to 01/22/2012

I don’t know if the following is a hoax or not (???) but it may worth watching. Chan reportedly has been working on replication for some months now.

Chan Fusion Power

01/22/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Andrea Rossi: Sinner or Saint

link

01/21/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Verisimilitude, lies, and true lies Part 1

http://www.mail-archive.com/vortex-l@eskimo.com/msg61926.html

01/21/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

A private discussion group has been created by National Instruments to allow its employees and customers to study LENR. Per the site:

“This group is created to discuss Low-Energy Nuclear Reactions (LENR) and related concepts (Lattice-Assisted Nuclear Reactions, Chemically-Assisted Nuclear Reactions, Superconductivity, Superfluidity, Quantum Critical Points, etc), R&D, technologies and applications.”

I post a link to the group just as a reference. No one but its private members can view its contents

https://decibel.ni.com/content/groups/lenr?view=overview

01/21/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

P.G.Sharrow
January 20th, 2012 at 6:59 PM

The E-cat energy amplifier is just one part of an energy production system. It can not solve all energy needs in one “black box”, It just makes heat. I was willing to pay $4 to $5000 for that “black box” heater as a part of my farm energy system. Now Andrea says he can do it for $500.WOW! I’ll take two and a box of fuel cartridges. And my neighbors, when they see this work, will take a dozen more. Hot water for a winery, heating for greenhouses. How can I help to make this work faster!? pg

Andrea Rossi
January 21st, 2012 at 5:00 AM

Dear P.G. Sharrow:
Within a couple of weeks we will have precise schedulings regarding the construction of the robotized factory, and the timing, so that I will be able to communicate the time terms within which we will able to start the deliveries, as soon as possible. We will work very hard on this.
Warm Regards,
A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

fabio
January 20th, 2012 at 1:00 PM

Dear Dr Rossi
Why not use a chemical reaction (which can be very powerful in a short time) to create the right temperature to achieve self sustenance of ‘cat and that could be triggered by a cartridge inserted into the system and be ejected at the end of the task by the system itself.
regards Fabio

Andrea Rossi
January 20th, 2012 at 5:02 PM

Dear Fabio,
This is a very good question, we are thinking of this, also because the electric energy is very expensive. The pro of the electric resistance is its compactness: chemical energy (combustion) needs space for venting, burning etc. But you are right.
Warm Regards,
A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Andrea Rossi, E-Cat: “It’s Just Not Cold Fusion”

link

01/20/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Andrea Rossi
January 20th, 2012 at 3:36 AM

DEAR READERS:
TODAY HAS BEEN PUBLISHED ON THE JOURNAL OF NUCLEAR PHYSICS THE INTERESTING PAPER OF DR MARCO LELLI “INTERACTION BETWEEN NEUTRINO FLAVOR OSCILLATIONS AND DARK ENERGY AS A SUPER-LUMINAL PROPAGATION”.
JONP

http://www.journal-of-nuclear-physics.com/?p=580

01/20/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

The Peak Oil Crisis: Cold Fusion Update

Falls Church News Press

Note: The article is obscured by ads and is best viewed by clicking the “print” icon in the upper right corner of the article. This will open up a box where the text can be viewed clearly.

01/19/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

New Video from Rossi now available on YouTube.

01/19/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Rumpelstiltskin Reaction

Cold Fusion Now

01/18/2012

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Is Rossi Looking at Mass Production for the E-Cat?

Oilprice.com

01/18/2011

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

john46blog
January 17th, 2012 at 11:02 AM

Dear Andrea,
I saw your recent interview with Sterling Allan. I discover a bunch of good news about your progress on e.cat development and I’m very happy for you. One thing I don’t like about your plans, it’s the decision to start the series production in Florida and possibly also in Massachusetts. You also mentioned that you prefer that e.cat technology became American! You are Italian my friend, as I am, and you know very well in which bad situation our country is at the moment. A revolutionary technology like your, could be very useful for our renascence; there is a fresh “air” now in our new government. Why you did not consider to start production in Italy instead? I understand of your old problems you had in the past here, this cannot be a justification for a strong man like you are. Just image the good contribution you
could bring to the unemployment reduction in our country.
Please reconsider your plans and include in them also Italy.
Thanks for your attention
Giovanni

Andrea Rossi

January 17th, 2012 at 4:57 PM

Dear john46blog:
If we want to help Italy with this technology, we must develope it in the USA before. If we start in Italy, we will be stopped before beginning. If you want to understand what I am saying, please go to http://www.ingandrearossi.com.

Nevertheless, we will maintain in Italy the R&D stronghold we already have and will develop it; actually, we ARE developing it. Besides, this will become a world diffused tech, therefore production sites will be born around the World, Italy enclosed.
Warm Regards,
A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Mark Szlazak
January 17th, 2012 at 3:31 PM

Dear Mr. Rossi,
How small can an e-cat device be? I’m think of a small application where the cooling system of a car is kept warm in cold climates like Canada. Usually people plug in there cars block heater when not in use. It helps with starting the car. Circulation type block heaters work at higher temperatures so the cars passenger heater also near warm enough when starting on cold winter mornings. E-cat type heaters would be even more powerful and provide block and passenger heating while the engine isn’t running without electricity costs.

Andrea Rossi
January 17th, 2012 at 4:41 PM

Dear Mark Szlazak:
It will be cm 30 x 30 x 12 circa. Not able to make electricity yet. Able to make heat and sanitary water ( this is a new of today: resolved also this problem).
Warm Regards,
A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

The Plumber
January 17th, 2012 at 12:36 AM

I know you have already stated that the e-cat is not suitable for domestic (potable) hot water. However, some home heating boilers systems will stop heating the house and dedicate all the heat to making domestic hot water in a storage tank. When that demand is satisfied, the system returns to heating the house. This delay is short and is not really noticeable in a house that is already warm. If the e-cat needs much more time than a boiler then why not make the domestic hot water at night when ocupants are sleeping. A 200L storage should be enough for most homes. Electric elements could still be used for backup during a large demand. The same could be adapted for e-cats running with forced air heating.

Andrea Rossi
January 17th, 2012 at 10:02 AM

Dear The Plumber:
This is one of the possible solutions, anyway we are resolving this problem.
Warm Regards,
A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Roger January 15th, 2012 at 2:21 PM

There is a rumor going about that you are having trouble stabilizing the e-cats due to non-homogeneous evolution of energy within the Ni powder that melts the powder locally and shuts the process down. If so you might benefit by adding radial fins extending into the chamber to provide more heat transfer area and a path to the outer surface of the reactor. In addition, the inclusion of copper beads to the power would act as a damper to temporarily absorb bursts of heat and would reduce the local temperature gradients within the Ni powder. I wish you well in your endeavors.

Andrea Rossi January 15th, 2012 at 5:15 PM

Dear Roger: I am not a rumorist, so I do not care of rumors. Our E-Cats are perfectly stable up to 200 Celsius degrees, while we are resolving the problems to raise the temperature of the primary fluid to 400, to be able to make electricity. The reasons of instability at higher temperature are different from the rumors you heard about and we cannot give information about this issue, because is related to confidential data. National Instruments is helping us to resolve the issue. Thank you for your attention, Warm Regards, A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Momentous Breakthroughs Announced During Anniversary E-Cat Interview

Article

Interview

01/17/2012

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Rossi Interview Claims Energy Catalyzer submitted for UL product certification

Next Big Future

01/17/2012

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Roberto Cerri January 16th, 2012 at 12:04 PM

Dear Mr. Rossi, I’m a fan and I make a proposal. Make certify the operation of your E-cat from National Instruments, so that even skeptics have to think again. If you do not believe she should believe in NI. Moreover, if the ‘E-cat already has’ received a patent in Italy, why not start selling it in our country? a hug, Roberto Cerri

Andrea Rossi January 16th, 2012 at 4:05 PM

Dear Roberto Cerri: Our work with National Instruments is in progress with great results. The sales of the 1 MW E-Cats are already in course in all the world, while the domestic will be put on sale hopefully starting from next autumn, and will be delivered starting from next winter, all over the world. Warm Regards, A.R.

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Franco January 16th, 2012 at 2:31 PM

Egr. Rossi, I see a lot of questions turn on the E-Cat home and the ability to apply it to systems of heating and domestic hot water production preesistenti.Ma if the system works, how auguiamo, there will be a reduction in the cost of producing electricity which soon will be more convenient to build power stations that distribute electricity at low cost per use, including heating / cooling and domestic hot water production sanitaria.O I’m wrong? Sincerely.

Andrea Rossi January 16th, 2012 at 4:00 PM

Dear Franco: It is probable that we will enhance a competition. Warm regards, A.R.

_____________________________________________

Short URL for this page:  http://wp.me/P1SDhJ-T4

Advertisements

Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s