01/30/2012 to 02/05/2012

NOT AS SMART AS A FIFTH GRADER

Numerical Analysis of Steven Krivit’s Latest Rants

Cold Fusion Times

12/5/2012

████████████████████████████████████

Kevin Reilly
February 4th, 2012 at 11:11 AM

Dear Mr. Rossi,
Will you be having a staffing agency hiring soon for the new factory in the USA and if so where could I submit a resume?

Thank you,
Kevin Reilly

Andrea Rossi
February 4th, 2012 at 2:40 PM

Dear Kevin Reilly:
Please forward your detailed c.v. and skill to
info@leonardocorp1996.com
Warm Regards,
A.R.

████████████████████████████████████

The Plumber
February 3rd, 2012 at 9:47 PM

The people “in the trenches” getting dirty doing the hands on are the most reliable sorce of ideas. Those people are the best qualified to evaluate the ideas generated by the people sitting at desks. I have note pads full of improvements to parts and equipment I use every day. I cannot help with the physics you have developed but I am a plumber and mechanical contractor since 1992. I would really love to help you with the practical aplication of the e-cat for the north amarican market.

Andrea Rossi
February 4th, 2012 at 8:03 AM

Dear The Plumber:
Very good, your good sense and experience will be certainly useful. Why don’t you contact me, with your real name, emailing to
info@leonardocorp1996.com
Warm Regards,
A.R.

████████████████████████████████████

Franco Morici
February 4th, 2012 at 8:03 AM

Good morning Ing. Rossi,

I would like to know if during Your tests, below the shield of the reactor, were measured non-ionizing electromagnetic emissions.
This general data does not seem to me to be stricly confidential and being this Blog also a scientific one, I hope that the answer, even if brief, will be different from answer:
“I cannot give information regarding the operation of the reactor”

If I have understood well, You intend (within short time) to delivery an E-cat unit to the Bologna or Uppsala University to allow they to perform tests (I suppose only the calorimetric measures), when will be delivered?

Kind Regards

Franco

Andrea Rossi
February 4th, 2012 at 8:36 AM

Dear Franco Morici,
I am very sorry to disappoint you again, but:
1- I cannot give information about what happens inside the reactor: as you have seen, many attempts of copies have been made, and, even if most of them are just clowneries with a mock up, as the ones of the …Kolions, some are dangerous, like NASA’s. We will be safe only when we will be on the market with our E-Cats at a very low price, due to the robotized production line we are setting up in the USA, but until then we have to be ermetically closed.
2- We do not give anymore any information about the work we do regarding our R&D program and about with which University we do it. This is to avoid the storm of inopportune contacts that arrive wherever we go to work, really annoying because in great part orchestrated by the Puppetteers through their puppets. The highest level of comicity has been reached very recently, when a Puppetteer wrote me saying that , after the genial interview released from a Primadonna to a puppett of his, the same Puppetteer offered himself as a friendly and for free “validator” after the University of Bologna cancelled the R&D contract with us because we couldn’t pay 500,000 Euros for their work to be done.
Warm Regards,
A.R.

████████████████████████████████████

Defkalion Promises Flow Calorimetry For Additional Hyperion Tests

Independent E-Cat News

02/04/2012

████████████████████████████████████

Cold Fusion is Here, It’s Real, and its Time has Come

OpEdNews

02/04/2012

████████████████████████████████████

Google Insights shows a burst of interest in LENR

Google Insights

Courtesy of Vortex

02/04/2012

████████████████████████████████████

E-Cat Weekly — February 2, 2012

This is a listing of the e-Cat and cold fusion coverage of the last week.

PESN

02/03/2012

████████████████████████████████████

Luca Salvarani
February 1st, 2012 at 10:57 AM

Dear Andrea Rossi 1) The address a question that has already been made but which did not really understand the answer, probably a little premature because: Once the e-cat spiluppato second generation is able to produce heat and generate electricity with an efficiency of about 30%, you can configure a number of e-cat (3.4 … those who serve on a case by case ) as a “system-only” so that the electricity needed to produce the self-generated heat is directly from e-cat (net of that initially used to start them)? This configuration significantly reduce the cost and operational e-cat no longer serve as the energy eletrico paid its weight in gold, but would then be enough self-produced energy refills sticks .. Also would “monetize” the excess heat turning it into electricity to be sold to the grid at a good price … on the model used for the renewable, potentially wiping out the operating costs themselves without having to constantly dell’ecat speed up or slow down the reaction. 2) You said that the COP of 6 can be improved in the future. I wanted to understand how difficult it is this improvement in terms of time, economic cost and technological complexity (which I imagine she will take the factors into consideration before doing so) .. an improvement that is relatively “cheap” to get or 6 is a kind of upper limit? I am not a technician and I hope I did not write nonsense .. Cmq thank you very much and do a great good luck! I recommend you keep up to date because many of us to follow and we are all eager for news!

Andrea Rossi
February 1st, 2012 at 7:56 PM

Dear Luca Salvarani,
I beg you to rewrite also in English your question, so that our Readers, mainly Anglophone, will understand what we say. I can give answers which translate the sense of the questions if the comments are short, otherwise in this period it is very hard for me because I have really not time. We are preparing the manufacturing of the million E-Cats, with the very high burden that it generates, we have to manufacture the 1 MW plants, all in the USA, while I have to fly across the World to prepare the network for the sales…please you translate, I answer, I promise.
Well, while writing this I understand that I am disappointing you, so now I answer translating for you, but in future, please, if the comments are more than 3 lines be kind, translate them in English.
Answers:
1- Yes, it will be possible to power the drives of the E-Cat in series, to increase the efficiency, of course when we will able to produce efficiently elecric energy. But I want to say you one thing: today we met a Partner in the USA who will allow a tremendous increase of efficiency of the system. The beautiful of this Country is that when you wake up in the morning you never know what will happen new during the day.
2- the improvement of COP will make sense only if it will not jeopardize the competitivity, you are right. Thank you very much for your kind attention,
Warm Regards,
A.R.

████████████████████████████████████

Massimo
February 1st, 2012 at 6:28 AM

Dear Andrea Rossi, if the energy produced by the E-cat is mainly radiation, did you think about direct conversion of radiation into electricity?
There are some promising technologies based on nano structures that could be potentially suitable to produce electric energy having more efficiency than the classic thermoelectric Rankine Cycle
http://www.newscientist.com/article/dn13545
Maybe the nano structures mentioned in this article and the materials used in your E-Cat could be even combined into a single structure suitable to produce long-lasting batteries.

Andrea Rossi
February 1st, 2012 at 8:10 AM

Dear Massimo:
Interesting, but not immediate. Now we are focused on the immediate goal to supply electric energy by E-Cats.
Very interesting, though, to be studied.
Warm Regards,
A.R.

████████████████████████████████████

Proposed ECat Schedule For 2012

E-Cat Report

02/01/2012

████████████████████████████████████

JET ENERGY, Inc. Successfully Scores its SECOND COLD FUSION/LANR OPEN DEMONSTRATION AT MIT During the First IAP Short Course on Cold Fusion

Cambridge, MA. – As part of the IAP Course on COLD FUSION at MIT (Cambridge, MA), Dr. Mitchell Swartz, JET Energy, and Prof. Peter Hagelstein demonstrated cold fusion openly for scientists and engineers. The demonstration was a two day part of the seven day course run by Prof. Hagelstein and Dr. Swartz, and followed the first open demonstrations of cold fusion at MIT in 2003. This JET Energy NANOR(TM) demonstrated a significant energy gain greater than 10, much larger than the previous open demonstration. This exhibition is also remarkable because it proved the role of lattice in enabling CF/LANR activity. It followed Prof. Hagelstein sharing his breakthrough explanatory theory of cold fusion. The NANOR technology of JET Energy may have already begun to shatter a few preconceived notions of skeptics and cold fusioneers.

Cold Fusion Times

02/01/2012

████████████████████████████████████

High Speed Bullet Trains Powered By Rossi E-Cats!

Rossi Cold Fusion & E-cat News

01/31/2012

████████████████████████████████████

Rebuttal to Australian Skeptics

Nickelpower

01/31/2012

████████████████████████████████████

Daniele Passerini Launches MIG-22 Initiative to Send Testers To Defkalion

E-Cat World

01/31/2011

████████████████████████████████████

Australian Skeptics’ eCat Verdict: It’s All A Terrible Error

Independent eCat News

01/31/2012

████████████████████████████████████

Has “maryyugo” been outed ? Read the entire thread that stars here.

01/30/2011

████████████████████████████████████

Defkalion Hyperion bare reactor internal testing

Video

01/30/2012

████████████████████████████████████

Buy your own nickel powder…if you dare. Buyer beware.

United Nuclear

01/30/2012

████████████████████████████████████

Test screening of the cold fusion movie “The Believers” to be held next month in Chicago. Watch the trailer in the bottom left of this page.

For more info, see article at Cold Fusion Now

01/30/2011

████████████████████████████████████

Information about Francesco Celani’s LENR workshop at CERN

Vortex-l

01/30/2012

_______________________________________
Short URL for this page:  http://wp.me/P1SDhJ-Y4
Advertisements

Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s