05/14/2012 to 05/20/2012

Franco
May 19th, 2012 at 1:08 PM

Dear Ing. Rossi,

You spoke about large improvement of steam temperature that now E-Cat system is able to produce, therefore the steam can be used, with very good efficiency, to produce electric energy by means of a classic turbine or Stirling turbine.
Please could You specify which is this new operating temperature value and the steam pressure now available?
Thank You.
Kind Regards

Franco

Andrea Rossi
May 19th, 2012 at 5:10 PM

Dear Franco:
We are working with good stability at 600 Celsius degrees. This, if confirmed by the next tests, clearly opens all the possible doors.
Warm Regards,
A.R.
p.s. Today, Saturday May 19th,right now, 6.10 p.m. in Miami, I am working at 600 Celsius with the new E-Cat

█████████████████████████████████

Hank Mills
May 18th, 2012 at 9:29 AM

Dear Andrea Rossi,

I would like to congratulate you for the rapid progress that has been made towards achieving stable high temperatures with the new industrial E-Cat module. Your progress is remarkable and is certain to continue.

In 2011 you gained many supporters who became fascinated with your technology, and the potential it holds to be utilized for the betterment of human civilization. Many of these supporters, including myself, became emotionally invested in your progress and the success of the E-Cat. In a world of almost constant warfare, human suffering, and economic turmoil a technology like the E-Cat represents a ray of hope in a dark, gloomy world.

The frequent tests you allowed in 2011 were extremely meaningful. To anyone without an agenda or pseudo-skeptic bias, they clearly demonstrated beyond any doubt the E-Cat technology works as claimed. In addition, the tests gave your supporters something to study, share with others, and discuss amongst themselves while they waited for the “world” as a whole to take notice.

In contrast to last year, 2012 has been quite different. For reasons that no one can refute, you have chosen to stop allowing tests of the E-Cat, and focus totally on pushing the technology to the market place. Obviously, this is the goal we all want to see met, so the E-Cat technology can go from an amazing discovery, to being utilized in a widespread manner.

I recognize that you are not going to allow any additional tests. However, I would like to ask you to consider posting some test data — from a test you have already performed — as a “pick-me-up” for your supporters. For example, it would be a very significant morale booster to see a sheet of test data and some graphs from one of the new modules producing high temperature steam.

Obviously, this will do nothing to change the minds of diehard skeptics and cynics. However, it would be appreciated by those who have been following your work and progress on developing the E-Cat. We have went for a while now with little hard data (which was plentiful last year) and having a “bone” to chew on would do us a lot of good.

Unlike conducting a new test, posting such already acquired data would not take you a lot of time, would require little preparation, and you could control exactly what information is released. Although the same skeptics will howl like they always have, I think you would get a lot of appreciation from those of us who have been trying our best to support your efforts in whatever way we can.

Sincerely,
Hank Mills

Andrea Rossi
May 18th, 2012 at 11:14 AM

Dear Hank Mills:
We will do.
Warm Regards,
A.R.

█████████████████████████████████

Talking Points for Politicians

Cold Fusion Now

05/19/2012

█████████████████████████████████

PESN Reports on Defkalion’s Progress

E-Cat World

05/19/2012

█████████████████████████████████

LENR-to-Market Weekly — May 17, 2012

PESN

05/17/2012

█████████████████████████████████

Rossi decides to move E-cat Production after radiation allegations

E-Cat = Rossi Cold Fusion

05/17/2012

█████████████████████████████████

Nanosheet Catalyst Discovered to Sustainably Split Hydrogen from Water. Low-cost non-noble electrocatalyst efficiently generates hydrogen gas for fuel

Brookhaven National Laboratory

05/16/2012

█████████████████████████████████

“Reviving Cold Fusion” — The American Chemical Society covers LENR

E-Cat World

05/16/2012

█████████████████████████████████

Is E-Cat Technology Exotic Energy?

E-Cat Report

05/15/2012

█████████████████████████████████

Antonella
May 14th, 2012 at 7:55 AM

Dear Robert Curto,

you say “I was expecting to hear about Factory number 3,4, etc. in other Countries.”

I think that Giovanni Guerini gives an answer when telling Dr Rossi “Do not forget that the significance of this discovery is not only ecological, but also and not least to change the power structures of the system.”.

It means that it is better to start in one specific Country; if a new technology starts in the USA, all other Nations will follow. It would not be very wise to start in a less advanced place.

Giovanni Guerrini
May 14th, 2012 at 3:52 AM

Add … and, if a law prior to the appearance of a new technology it disallowed the application, it would be sensible of this in-depth analysis and adaptation of the standard and the laws are Members elected (more or less) from gente.La Large-scale introduction of this technology is essential so that it can change the world and this I believe is the intrinsic motivation to his appearance on the scene. Do not forget that the significance of this discovery is not only ecological, but also and not least to change the power structures of the system. Yesterday, for example, we are like millions of people took to the streets with this request, so I would say that this device will be a catalyst not only energy, but also of freedom, prosperity and greater social equity. Regards G G

Andrea Rossi
May 14th, 2012 at 8:59 AM

Dear Antonella, Dear Giovanni Guerrini:
The false statements contained in the answer that the Italian Government guy ( a deputy minister !!!) has given are a clear signal. If you analyse the language and compare the evident lack of specific information of this guy with the arrogance of his conclusions ( for example: “the patent will not be granted in Europe”, and he knows nothing of the pending patents, or ” Rossi in some occasion said his apparatus emits radiations, in other occasions said the contrary”, which is false because I always said that no radiations are emitted to the external of the apparatuses from the E-Cats, and I always said that the low level gamma rays inside the E-Cat are turned into heat) and compare the arrogance of the statements with the evident lack of information,as I was saying, the signal is clear: lobbies bound to the government have acted. Add the fact that a person, financed by the taxpayer, is blowing on the fire to try to stop us to promote more public funding to state owned companies that produced only chatters in 20 years of work, shake the all and the resulting cocktail is: better we stay away from there, if I want not to get stuck in the mud. We will sell in Italy our production, but will work safe in the USA and, probably, in Sweden, where we are organizing a strong organization.
Warm Regards,
A.R.

The response by the Italian “government guy” Rossi references, can be found here. In fact, this was a reply by the Italian Secretary of State to an Italian parliamentary inquiry regarding the e-Cat a couple of weeks ago.

05/14/2012

█████████████████████████████████

Brian Josephson on Meeting With Andrea Rossi

E-Cat World

05/14/2012

█████████████████████████████████

News update from Andrea Rossi and ECAT.com in May

Ecat.com

05/14/2012

█████████████████████████████████

Synthetic Fuels vs. Cold Fusion

Andrea Rossi E-Cat

05/14/2012

█████████████████████████████████

Short URL for this page:  http://wp.me/P1SDhJ-1hm
Advertisements

Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s